Avital 4103 Installation Guide download pdf (Page 24)

Programming jumpers

AVISTART 4003

Input polarity jumper

ACTIVATION INPUT POLARITY

(-)

(+)

TACH THRESHOLD

LIGHT FLASH OUTPUT

O

(-)

(+)

*default setting

➢Light ﬂash (+)/(-)

This jumper is used to determine the light ﬂash output polarity. In the (+)

position, the on-board relay is enabled and the unit will output (+)12V

on the WHITE wire, H1/9. In the (-) position, the on-board relay is dis-

abled. The WHITE wire, H1/9, will supply a 200mA (-) output suitable

for driving factory parking light relays

Note:

For parking light circuits that draw 10 amps or more, the internal

jumper must be switched to a (-) light ﬂash output.

P/N 8617

or a

standard automotive SPDT relay must be used on the H1/9 light ﬂash

output harness wire.

➢Activation Input (+)/(-)

This jumper is used to determine the input polarity to activate the remote

start. In the (+) position the White/Blue H1/4 wire will require a (+)

pulse to activate the remote start. In the (-) position the White/Blue

H1/4 wire will require a (-) pulse to activate the remote start.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 47 48

No comments

Avital 4103 Installation Guide Page 24