Avital 3100 Installation Guide download pdf (Page 11)

Function Table

Valet button presses

(Chirps/Flashes)

System Function

1 Arm/Disarm/Panic

2 Aux Channel 2

3 Aux Channel 3

4 Arm only

5 Disarm only

6 Panic only

7 Auto-learn standard conﬁguration*

8 Delete remote controls & Reset features**

*Press any remote button to program the standard button conﬁguration as

described in the owners manual.

** Press any button of a programmed remote to delete all remote controls from

the system and to reset the features to default settings.

System Feature Programming

The system features are pre-programmed to default settings and may need to

be changed to accommodate vehicle speciﬁc requirements and user prefer-

ences. To change the system feature settings use the following procedure:

Important: Test the systems Ignition input, Door trigger input, Valet button,

Status LED, and siren for proper operation before proceeding.

1. Select a System Feature and required number of Valet button presses as

described in the following Features table.

2. Open a door, turn the key ON, and then OFF.

3. Press and release the Valet button to select the feature. After pressing

and releasing corresponding to the selected function, then press the Valet

button once more and hold it. The LED ﬂashes and the siren sounds to

conﬁrm the selection.

4. While still holding the Valet button press the

AUX

button on the

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

No comments

Avital 3100 Installation Guide Page 11