Avital Phoenix 2 Owner's Manual download pdf (Page 6)

Operating Instructions

To Arm The System

The alarm can be programmed for active or passive arming. Active arming

means the alarm can only be armed by the remote control. Passive arming

means the alarm will automatically arm itself. (See the "Programming Table

for System Features" on page 11.)

Active Arming

Press the remote ARM/DISARM button for 1-2 seconds. The siren will chirp

twice, the parking lights will flash twice, the doors will lock, the LED will flash

slowly and the starter will be disabled.

Passive Arming

Turn the ignition key "OFF," exit the vehicle and close the doors. When the

interior lights turn off, the LED will begin flashing rapidly to indicate the alarm

is passive arming. After 30 seconds, the siren will chirp twice, the parking

lights will flash twice, the LED will flash slowly and the starter will be disabled

(at any time during passive arming, the alarm can be actively armed).

To Disarm the System

Press the remote ARM/DISARM button for 1-2 seconds. The siren will chirp

once, the parking lights will flash once, the doors will unlock, the interior

lights will turn on, the LED will turn off and the starter will be enabled.

Remote-Controlled Silent Arm/Disarm

Press the remote SILENT button for 1-2 seconds to arm or disarm your system

without the usual siren chirps.

Silent Arm Indications

The parking lights will flash twice, the doors will lock, the starter will be

disabled and the LED will flash slowly.

Silent Disarm Indications

The parking lights will flash once, the doors will unlock, the starter will be

enabled and the LED will turn off.

Phoenix

Rev. A - Owner's Manual 0399

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

No comments

Avital Phoenix 2 Owner's Manual Page 6