Avital 4003 User Manual download pdf (Page 2)

QRN4003 2011 -12

Programming System Features

The System Features Learn Routine dictates how the unit operates. It is possible to access and change most of the

feature settings using the Valet button.

1. Turn the ignition on, then off.

2. Select a Menu. Press and hold the Valet button. When the LED ﬂashes once, Menu One has been se-

lected. Continue to hold the switch until the LED ﬂashes twice. Menu Two has now been selected.Release

the Program switch after the desired Menu choice has been selected.

3. Choose. Within 10 seconds, press and release the Valet button the number of times corresponding to the

feature number you want to program. (See Features Menu section.)

Once the Valet button has been pressed and released the desired number of times, press it once more and

hold it. After a second, the LED will ﬂash to indicate which feature you have accessed. For example, groups

of eight ﬂashes would indicate access to the status output feature (Feature 8 of menu 2).

4. Activate Input. Each time the white/blue is pulsed, the LED will turn on or off indicating the feature setting.

If the feature has more than two selections, each time this input is pulsed the next available setting will be

picked. For example if 60 minute runtime is chosen, (Feature 2, Menu 2) the LED ﬂashes 3 times.

5. Release. The Valet button can now be released.

Once a feature is programmed:

• Other features can be programmed within the same menu

• Another menu can be selected

• The learn routine can be exited if programming is complete

To access another feature in the same menu:

1. Press and release the Valet button the number of times necessary to advance from the feature you just pro-

grammed to the next one you want to program.

2. Then press the Valet button once more and hold it.

To select another menu:

1. Press and hold the Valet button.

2. After 3 seconds, the unit advances to the next menu, the horn honks and LED ﬂashes indicating which menu

has been accessed.

The learn routine exits if any of the following occurs:

• The ignition is turned On

• There is no activity for 30 seconds

• The Valet button is pressed too many times

Bitwriter - Only Options

If programming with the Bitwriter®, the learn routine can be locked or unlocked. If the learn routine has

previously been locked, it must be unlocked with Bitwriter® - this cannot be done manually with the Valet

button.

The Bitwriter® gives you access to a wider range of system options. These features and the adjustments that

may be programmed are described in the table below.

Menu Item Feature Default Options

Engine Runtime

12 min.

1-60 min.

Diesel start type

Off

Timed

Diesel start delay time (seconds)

15 sec

1-90 sec.

Virtual Tach Fine Tune

Not initialized

0 to 1 second in 50 millisecond

increments

Remote control programming

Unlocked

Locked

Feature Programming

Unlocked

Locked

Remote Start Shutdown Diagnostics

To perform shutdown diagnostics:

1. With the ignition Off, press and hold the Valet button.

2. Turn the ignition On and then back Off while holding the Valet button.

3. Release the Valet button.

4. Press and release the Valet button. The LED ﬂashes to report the last shutdown for one minute or until the

ignition is turned on, as shown in the following table:

LED Flashes Shutdown Mode

1 ﬂash Timed out

2 ﬂashes Over-rev shutdown

3 ﬂashes Low or no RPM, low battery (voltage and virtual tach modes)

4 ﬂashes Transmitter shutdown (or optional push button)

5 ﬂashes (-) Hood Shutdown (H3/4 GRAY)

6 ﬂashes (+) Shutdown (H3/3 BROWN)

7 ﬂashes (-) Neutral safety shutdown (H3/1 BLACK/WHITE)

8 ﬂashes Wait-to-start timed out

Feature Menus

Default settings are in bold type.

Menu 1

Feature # Feature Opt. 1 Opt. 2 Opt. 3 Opt.4 Opt. 5+

1 Horn function

Off

Siren

20 mS

Siren

30 mS

Siren

40 mS

Siren

50 mS

2 Ignition con-

trolled lock

Off

3 Ignition con-

trolled unlock

Off

4 Doorlock out-

put duration

0.8 sec

3.5 sec. 0.4 sec.

5 Double pulse

unlock

Off

6 Double pulse

lock

Off

7 Factory Alarm

Disarm func-

tion

with unlock

Before unlock Remote start

only

8 Factory Alarm

Disarm Pulses

Single

Double

9 Comfort

Closure

Comfort

Closure 1

Off

Comfort

Closure 2

10 Panic

Off

Menu 2

Feature # Feature Opt. 1 Opt. 2 Opt. 3 Opt.4 Opt. 5+

1 Engine check-

ing

Virtual tach

voltage Off tachometer

2 Engine

Runtime

12 min

24 min 60 min

3 Park light

output

Pulsed

Constant

4 Cranking time

0.6 sec

0.8 sec. 1.0 sec. 1.2 sec. 1.4,

1.6,

1.8,

2.0,

4.0 sec

5 Activation

pulse count

1 pulse

2 pulses 3 pulses

6 2nd Ignition

behavior

Ignition

Accessory

7 Accessory

output

Off during

wait-to-start

On during

wait-to-start

8 2nd Status

behavior

Normal

Latch rear

defogger

Pulse rear

defogger

9 Anti-grind

Off

10 Diesel start

delay

Off

Timed 15 sec Timed 30 sec. Timed 45 sec.

11 Timer mode

run time

12 min

3 min 6 min 9 min

Bitwriters with a date code of 6a or older require an IC

upgrade (p/n 998M). Some bitwriters with a date code

of 6B do not require the IC upgrade, refer to tech tip #

1112 for more information.

The Bitwriter® (p/n 998U)

requires chip version 2.7 or

newer to program this unit.

See full Installation Guide for more

detailed information on this system.

Such information and more can be

found online at:

www.directechs.com

Logo, Directed Electronics w-driven.eps

Logo, Directed with designed in USA.eps

Logo, Directed with Distributed By.eps

Directed Logo Usage

1 2

Comments to this Manuals

No comments

Avital 4003 User Manual Page 2

Comments to this Manuals

Related products and manuals for Car alarm Avital 4003